Honda Nick
12-30-2009, 11:10 PM
Setup:
'99 FRC Corvette
TSP 383 LS6 short-block
PRC 215 heads milled to 59cc
Torquer 3 camshaft (231/234 .643"/.598" 111 LSA)
FAST 92 Intake Manifold
92mm Throttle body
Bolt-ons
Monster stage 3 clutch and flywheel
SAE dyno results with less than 100 miles:
http://www.epracing.org/Nick/Corvette/Dec2009Dyno.jpg
I was running a MS4 cam on stock cubes, and had my fill of the peak power game. Wanted to be able to drive the car more often, more area under the curve, etc...
For comparison, stock cubes, ms4 cam, prc 215 heads, ls6 intake:
http://www.epracing.org/Nick/Corvette/215Dyno.jpg
'99 FRC Corvette
TSP 383 LS6 short-block
PRC 215 heads milled to 59cc
Torquer 3 camshaft (231/234 .643"/.598" 111 LSA)
FAST 92 Intake Manifold
92mm Throttle body
Bolt-ons
Monster stage 3 clutch and flywheel
SAE dyno results with less than 100 miles:
http://www.epracing.org/Nick/Corvette/Dec2009Dyno.jpg
I was running a MS4 cam on stock cubes, and had my fill of the peak power game. Wanted to be able to drive the car more often, more area under the curve, etc...
For comparison, stock cubes, ms4 cam, prc 215 heads, ls6 intake:
http://www.epracing.org/Nick/Corvette/215Dyno.jpg