PDA

View Full Version : Got my ported FAST 92 slapped on

JayplaySS3
03-20-2009, 10:25 PM
Awesome addition to my TEA heads and Vengeance cam already. Major improvement over the ported LS2 :cheers:

Enjoy the car porn

http://i48.photobucket.com/albums/f209/JayplaySS/FAST020.jpg
http://i48.photobucket.com/albums/f209/JayplaySS/FAST022.jpg

Bare TEA's

http://i48.photobucket.com/albums/f209/JayplaySS/FAST005.jpg
http://i48.photobucket.com/albums/f209/JayplaySS/FAST006.jpg
http://i48.photobucket.com/albums/f209/JayplaySS/TEA010.jpg

Flow chart
http://i48.photobucket.com/albums/f209/JayplaySS/TEA007-1.jpg

Ported/C6 modded FAST ala Spin from CF

http://i48.photobucket.com/albums/f209/JayplaySS/FAST009.jpg
http://i48.photobucket.com/albums/f209/JayplaySS/FAST012.jpg
http://i48.photobucket.com/albums/f209/JayplaySS/FAST013.jpg
unit213
03-20-2009, 11:02 PM
Very nice Jason! Lookin' good.
Pheonix
03-20-2009, 11:02 PM
Sweet! Looks nice! real nice!
JayplaySS3
03-20-2009, 11:05 PM
Thank you gentleman :naughty:
-Joseph-
03-20-2009, 11:06 PM
You might add a note as to why the rear is modified for C6's. :)
Trev_SS
03-20-2009, 11:08 PM
Sweet I wish I had one.
JayplaySS3
03-21-2009, 12:14 AM
You might add a note as to why the rear is modified for C6's. :)

Excellent point


The C6 firewall has very little clearance when compared to the F-body/GTO. The MAP sensor area on the rear of the manifold actually interfers with the firewall on the C6's. The MAP sensor on the LS2 is also on the front near the throttle body as well. They cut the rear of the manifold vs cutting the firewall and make a hole in the front of the manifold for the MAP sensor.

Works just fine too.
Sammyboy
03-21-2009, 12:33 AM
very nice....how much can you actually port a FAST 92 or even a FAST 90??
JayplaySS3
03-21-2009, 01:22 AM
very nice....how much can you actually port a FAST 92 or even a FAST 90??

About $300 worth :rotflmao:

Actually smoothing the casting lines to pick up velocity is the main concern
Detoxx
03-21-2009, 02:29 AM
That looks sweet
kevin99hoss
03-21-2009, 03:07 AM
i wish there was that much room to do a intake swap on f-bodys
it looks great do the 92mm work with the stock fuel rail? you have to use aftermarket fuel rails on the 90mm right?
00silver6
03-21-2009, 10:06 AM
looks good.
LowBird
03-21-2009, 10:30 AM
Looks good. MMMM car porn!
homerunhtr21
03-21-2009, 10:46 AM
Very Nice
krambo
03-21-2009, 11:34 AM
Excellent point


The C6 firewall has very little clearance when compared to the F-body/GTO. The MAP sensor area on the rear of the manifold actually interfers with the firewall on the C6's. The MAP sensor on the LS2 is also on the front near the throttle body as well. They cut the rear of the manifold vs cutting the firewall and make a hole in the front of the manifold for the MAP sensor.

Works just fine too.


Interesting! See I picked up something new on this site already. :naughty:
JayplaySS3
03-21-2009, 11:53 AM
i wish there was that much room to do a intake swap on f-bodys
it looks great do the 92mm work with the stock fuel rail? you have to use aftermarket fuel rails on the 90mm right?


Actually, you can use the LS2 rails just fine, you just have to use LS1 sized lower o-rings for the injectors to manifold and you need large washers to hold the line down since thay don't line up perfectly. It works though.

Thanks guys, still slow but getting there.

Here are a few more pics for the hell of it.
We can use the traffic.

If you look at the last pic, you will see just how close the firewall is to the stock LS2 intake, ouch.

http://i48.photobucket.com/albums/f209/JayplaySS/FAST002.jpg
http://i48.photobucket.com/albums/f209/JayplaySS/TEA012.jpghttp://i48.photobucket.com/albums/f209/JayplaySS/TEA002.jpg
http://i48.photobucket.com/albums/f209/JayplaySS/TEA003.jpg
http://i48.photobucket.com/albums/f209/JayplaySS/TEA009.jpg
http://i48.photobucket.com/albums/f209/JayplaySS/TEA014.jpg
Tims2001z
03-21-2009, 11:59 AM
Looking good. let us know what it puts down!
SPLATT
03-21-2009, 12:20 PM
wow, nice job. i cant wait to get a fast!
DeerHunter_Z28
03-22-2009, 12:21 AM
Looks good
badride42
03-22-2009, 01:09 AM
Looks good, hows the seat of the pants feel?
JayplaySS3
03-22-2009, 01:49 AM
Looks good, hows the seat of the pants feel?

SOTP is amazing. I am very impressed. It's not quite my KB Cobra under 100mph but from a 45-50 kick, it will spin the tires until I let off or it hits 3rd. The pull from 65+ is insane for N/A, very similar to my Cobra as the speed gains. I need a new tune and a 100 shot. :naughty:
chavez885
03-22-2009, 02:56 AM
Sweet...the vette is coming along nice man.
RacerXLS1
03-22-2009, 03:13 AM
Looks good.
92builtbird
03-22-2009, 11:33 AM
clean as hell!!
JayplaySS3
03-22-2009, 12:36 PM
Sweet...the vette is coming along nice man.

Thanks man.

Looks good.

Thank you man

clean as hell!!

Not bad, I'm not sure if the modding ever ends though!
motoo344
03-22-2009, 12:43 PM
Nice, I love how clean the engine bay looks.
WSsick
03-22-2009, 01:19 PM
your car looks shitty and why would you waste money on a POS? jk. thought i'd be the different opinion.


looks sweet, now lets see the bad boy in action!:devil:
Ron@Vengeance
03-23-2009, 04:12 PM
Lookin good :)